4-68. DEFLECTORS (CONT)
Position deflector (4) on platform weldment brackets and secure with four capscrews (7), washers (6), and locknuts
Position access cover (3) on deflector (4) and install four lockwashers (2) and capscrews (1).
Reconnect electrical leads to clearance lights mounted on access cover and deflector.
4-69. STOWAGE COMPARTMENT
This task covers:
General mechanics tool kit, item 16, appx. B
Jack, hydraulic floor, 10 ton, item 18, appx. B
Personnel Required: 2
BII inventoried and removed from stowage box (table 2-1)
Loosen four nuts (1) and screws (2) securing platform stowage compartment (3) to platform (4).
Position hydraulic floor jack (5) under stowage compartment (3) and raise jack until jack makes firm contact with
bottom of stowage compartment.
Remove four nuts (1), lockwashers (6), and screws (2) securing stowage compartment to platform (4). Discard
Using two people, steady stowage compartment (3) on pedestal of hydraulic floor jack (5), lower jack as necessary,
and pull jack with stowage compartment from under platform (4).
4-326 Change 3