TM 9-2330-381-14
4-72. CABLE GUIDE (CONT)
DISASSEMBLY
1.
Remove two bearings (15) from roller assembly (8).
2.
Remove two bearings (15) from each roller assembly (12 and 14).
INSPECTION
WARNING
Cleaning compound solvent is used to clean parts and is potentially dangerous to
personnel. Extinguish all smoking materials and do not allow sparks or open
flame near the work area. Use skin and eye protection and work in a well-
ventilated area.
1.
Clean all parts removed in degreaser tank with cleaning compound solvent and wire brush as necessary. Remove
corrosion using wire brush and crocus cloth.
2.
Inspect rollers and roller shafts for surface deterioration, scratches, scoring, pitting, burrs, or gouging that could
interfere with mounting or mating components or bearings.
3.
Inspect bracket weldments for broken welds, cracks, and evidence of warping, and peeling of paint.
4-340