STEERING CONTROL MANIFOLD (CONT)
Remove caps/plugs installed on two hydraulic tubes (2 and 1). Connect two hydraulic tubes (2 and 1) onto two
tube-to-boss tees (3) on steering control manifold (4).
Perform hydraulic system check/fill and refill hydraulic tank (para. 4-17).
Manually adjust steering (para. 2-18) and check for proper operation.
SUSPENSION CONTROL MANIFOLD
This task covers:
General mechanics tool kit, item 16, appx. B
The following tools can be found in common tool kit no. 1, item 17, appx. B:
Drain pan, 4 gl
Extension light, 24 ft
Gloves, chemical and oil protective
Degreaser tank, 20 gl
Cleaning compound solvent, item 25, appx. E
Preformed packing (20)
Cartridge repair kit (5)
Cartridge repair kit (1)
Cartridge repair kit (4)
Personnel Required: 2
Suspension isolation valves at four corners of platform closed, handles facing outward (para. 2-6)
Hydraulic tank drained below system return line (para. 4-18)
4-386 Change 1