General Safety Instructions
Hydraulic fluid may be absorbed through the skin. Avoid prolonged exposure to
skin and wear long sleeves, gloves, and goggles or face shield. If hydraulic fluid
gets into the eyes, flush them immediately with water and seek medical attention.
If hydraulic fluid gets on skin, wash thoroughly with soap and water. Wash hands
thoroughly prior to eating or smoking.
Hydraulic fluid may be hot if system has been in operation. Allow time for system
to cool before performing maintenance or injury to personnel may result.
Residual pressure may remain in hydraulic lines. Open fittings slowly or injury to
personnel may result.
All fittings and openings must be capped or plugged immediately after opening to
prevent dirt, moisture, or foreign material from entering the hydraulic system or
damage to equipment may result.
This procedure is for removal/installation of all gooseneck cylinder hydraulic
components. Perform this procedure, or any portion of this procedure, as required
to complete necessary repairs. Use the hydraulic schematic (figure FO-3) as a
guide for hose routing.