TM 9-2330-381-14
4-92.
22.
At curbside #1 bogie, remove caps/plugs. Apply pipe sealant to all male threads. Install two tube tees (19) and
tubes (18 and 17).
23.
At #4 bogies, curbside and streetside, proceed as follows:
a. Remove caps/plugs. Apply petroleum jelly to two preformed packings (12). Slide loom (13) onto two hoses (11).
Install two preformed packings (12) and hoses (11).
c. Install two clamps (10) and secure with two screws (9), washers (8), and self-locking nuts (7). Install tiewraps as
required.
4-462