ULTRA BUSHING (CONT)
Combined weight of cannister, shaft, puller, ultra bushing, and hydraulic ram
requires two persons. Cannister may fall off of axle after third ram stroke. Do not
allow end of shaft to scratch interior bore of ultra bushing housing. Be prepared
and use two persons or injury to personnel and damage to equipment may result.
Repeat step 10 as necessary (approximately three times) until ultra bushing (12) is completely clear of housing
(10) and is inside cannister (13).
Using two persons, firmly hold cannister (13), tap lightly to loosen from housing (10), and carefully lower to the