5-17. STEERING PLATE (CONT)
Remove only the capscrews from the four corners of steering plate, leaving the
two remaining capscrews to secure steering plate to mainbeam until support
chains can be attached or injury to personnel may result.
Remove capscrew (11) and lockwasher (12) from each corner of steering plate (13) and mainbeam (14). Discard
Above platform, where two access covers (8 and 9) were removed, position suitable lifting device (15).
Attach two chains (16) to steering plate (13) and suitable lifting device (15). Take up as much slack in chains as
Position crowbar (17) under forward part of steering plate (13) for support.