GOOSENECK/PIVOT PIN (CONT)
An overhead lifting device, four chains, and two clevises will be used to
support/transport gooseneck to work area after pivot pin has been removed.
Protect gooseneck bracket holes by applying tape to clevises or clevises will
damage bracket holes.
Using suitable lifting device, four chains (1), two clevises (2), and tape, support gooseneck (3) by attaching one
chain (1) and taped clevis (2) through each gooseneck cylinder mounting bracket and two chains (1) through
kingpin box weldment adjacent to steering wedge. Take up slack in chains.
Remove four screws (4), two access covers (5), two mounts (6), and two keys (7). Discard mounts.
Remove two locknuts (8), two covers (9 and 10), and spacer (11). Discard locknuts and spacer.
Remove pulley (12) and threaded rod (13) from gooseneck (3).