TM 9-2330-381-14
NOTE
Spacer (18) is thicker than spacer (19). Spacer (18) goes on pivot pin (17) first.
6.
Install spacers (18 and 19) onto streetside pivot pin (17). Make sure keyway in streetside pivot pin (17) is alined
with key slots in platform. Using a sledge hammer and piece of wood, drive streetside pivot pin (17) to inboard
edge of bearing (23).
NOTE
Grease will help to hold spacer in place during installation.
7.
Apply grease liberally to spacer (20) and install between inboard edge of streetside pivot pin (17) and platform.
Make sure spacer (20) is alined to allow streetside pivot pin (17) to be driven through spacer (20) into platform,
and continue driving streetside pivot pin (17) into platform.
5-125