TM 9-2330-381-14
ASSEMBLY
1.
Lubricate bearing ring (14) with petroleum jelly. Open bearing ring (14), and install on plunger rod (11).
2.
Lubricate piston ring (13) with petroleum jelly and install piston ring (13) on plunger rod (11).
3.
Lubricate interior of cylinder assembly (9) with hydraulic fluid. Using stop ring tool and suitable prybar, insert
plunger rod (11) onto cylinder assembly (9) and screw in piston ring (13) as far as it will go. Remove stop ring
tool.
4.
Assemble rod seal (12) with three black parts together. Aline and insert into clear part. Apply a coat of petroleum
jelly to rod seal (12) and seal inserter (part of repair kit).
5-131