TM 9-2330-383-14&P
(6)
Connect ground lead (18) and electrical lead (17).
b. To install clearance marker light (1) on old trailers with serial numbers
2000 and below, proceed as follows:
(1)
If removed, install gasket (16) and mount plate (7) using four 3/16-
inch blind fasteners.
(2)
Install terminal (10) if removed. Insert terminal (10) through shell
(8). Install C-washer (9) on terminal (10) and pull shell (8) over
terminal.
(3)
Connect connector to wiring harness.
(4)
Mount socket base (6) to mount plate (7) with grounding screw (5).
(5)
Install lamp (4).
(6)
Install lens (3) with two screws (2).
END OF TASK
Change 1