TM 9-2330-383-14&P
4-14. KNUCKLE ASSEMBLY (CONT)
g. Insert tapered pin (17) and secure with washer (16) and nut (15). Torque to
55-60 lb ft.
h. On old trailers with serial numbers 2000 and below, replace top and bottom
gaskets (14) and plates (13) and secure with six lockwashers (12) and bolts
(11). Torque to 6-8 lb ft.
h.1. On new trailers with serial numbers 2001 and up, install two caps (14.1).
i. Replace key (10) and assembly arm (4). Secure with nut (9) and cotter pin
(8).
j. Replace tie rod (7) and secure with nut (6). Torque to 125 lb ft and tighten
to aline hole; then install cotter pin (5).
k. On streetside only, install short tie rod (3) on assembly arm (4) and secure
with nut (2). Torque to 125 lb ft and tighten to aline hole; then install
cotter pin (1).
l. Lube two fittings top and bottom on axle.
END OF TASK
Section VII. MAINTENANCE OF AIR BRAKE SYSTEM
4-15. SERVICE BRAKE ASSEMBLY
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General mechanics tool kit
Materials/Parts
Lockwasher (2)
Lockwasher (4)
Lockwasher (8)
Lockwasher
Change 1