TM 9-2330-383-14&P
4-15. SERVICE BRAKE ASSEMBLY (CONT)
INSTALLATION
a. Aline spider (16) and deflector (17) and install five screws (19).
b. On new trailers with serial numbers 2001 and up, attach spider (16) and
deflector (17) to spindle (18) with seven (on front brakes, eight on rear
brakes) screws (15), lockwashers (14), and nuts (13). Torque nuts (13) to
150-170 lb ft.
b.1. On old trailers with serial numbers 2000 and below, attach spider (16) and
deflector (17) to spindle (18) with eight screws (15), lockwashers (14), and
nuts (13). Torque nuts (13) to 150-170 lb ft.
c. Install two bushings (12) and washers (11) into cam bracket assembly (10),
and install with four screws (9) and lockwashers (8).
d. On old trailers with serial numbers 2000 and below, at rear brake only,
install bracket (7), bolt (6), lockwasher (5), nut (4), U-bolt (3), clamp (2)
and two nuts (1). Torque nut (4) to 45-55 lb ft. Torque two nuts (1) to 50-70
lb ft.
e. On new trailers with serial numbers 2001 and up, install plug (21) and grease
fitting (20).
END OF TASK
This task covers: a. Removal
c. Inspection
b. Cleaning
d. Installation
INITIAL SETUP
Tools
Equipment Condition
General mechanics tool kit
Lock ring pliers
Pry bar
Materials/Parts
4-30
Change 1