TM 9-2330-383-14&P
f. Remove two plugs (21) and petcock (22).
INSTALLATION
NOTE
Apply anti-seize tape to all male threads before connecting.
Left Rear Tank.
a. Install petcock (22) and two plugs (21) into air tank (5).
b. Install reducer bushing (20), nipple (19), check valve (18), nipple (17),
pressure protection valve (16) and tee (15).
c. Install reducer bushing (14), dust cap (13) and quick-disconnect fitting
(12).
d. Install reducer bushing (11) and tee (10).
e. Install air tank (5) and secure with four screws (9), washers (8),
f. Connect four tubes (4, 3, 2 and 1).
4-47