TM 9-2330-383-14&P
4-26.1. WHEELS AND TIRES (CONT)
k. Position tire (2) so part of upper bead is below rim on side opposite valve
stem. Clamp locking jaw pliers (15) on rim on side opposite valve stem.
l. Insert curved end of long tire iron (10) between upper bead and rim
approximately 10 to 12 inches from position of locking jaw pliers (15).
m. Push down on tire (2) where locking jaw pliers (15) are located and lever
tire iron (10) to force upper bead down over rim.
4-58.16
Change 1