TM 9-2330-383-14&P
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
Materials/Parts
General mechanics tool kit
Lockwasher (4)
Torque wrench, 3/8-inch drive, 0-150 lb ft
REMOVAL
Remove two hex nuts (1), lockwashers (2), capscrews (3) and flat washers (4) to
remove each of two bumpers (5) and spacing pads (6).
INSTALLATION
Install each bumper (5) and spacing pad (6) with two capscrews (3), flat washers
(4), lockwashers (2) and hex nut (1). Tighten hex nut to 72-78 lb ft.
END OF TASK
4-32. POD STOPS
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
General mechanics tool kit
4-69