TM 9-2330-383-14&P
4-42. SWAY BARS (CONT)
REMOVAL
NOTE
Prior to removing sway bars, mark which is curbside and which is
streetside of sway bar. This will expedite reinstallation.
a. Tag, disconnect, and remove air hoses from brake chambers and air bags. Cap
hoses, air bags and brake chambers.
b. Jack up and block frame.
c. Remove two lock nuts (1) and bolts (2) from ends of sway bar (3). Remove sway
bar (3).
INSTALLATION
a. Aline sway bar (3) so previously marked curbside and streetside are correct.
b. Insert two bolts (2) and secure with two lock nuts (1). Torque to 650-680 lb ft.
END OF TASK
4-90