TM 9-2330-384-14&P
Table 4-2. Unit Troubleshooting Procedures (Con't).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
SLOW BRAKE APPLICATION OR RELEASE
8.
Step 1.
Check for proper lubrication at camshaft and slack adjuster grease fittings (see
Lubricate according to instructions in Chapter 3, Section I.
Step 2.
Step 3.
WARNING
Compressed air used for clearing restrictions must not exceed 30 psi
(207 kPa). Wear protective clothing (goggles, face shield, and gloves) and
use caution to avoid injury to personnel.
Use compressed air to clear any restrictions. If restrictions cannot be
removed, or if airline is kinked, replace affected air line (see paragraph 4-39).
Step 4.
WHEELS AND TIRES
9. NOISY OR WOBBLY TIRE AND RIM ASSEMBLIES
Step 1.
Step 2.
Step 3.
Step 4.
4-24