TM 9-2330-384-14&P
4-19. BLACKOUT LIGHT MAINTENANCE (Con't).
Reach inside light box (1) and use a 9/16 in. wrench to remove two bolts (14), terminal (13)
(2)
from convoy warning light brown wire (7), and two starwashers (12). Pull blackout light (4)
and wires from light box (1), Discard starwashers.
At connector (5), disconnect blackout light wire assembly #24 from chassis gray wire assem-
(3)
bly (8). At connector (6), disconnect blackout light wire assembly #23 from rear conduit
orange wire assembly (9).
b. CONNECTOR REPAIR
(1)
If damaged, cut connectors (5 and 6) from ends of blackout light (4) wires. Discard connec-
tors.
(2)
Manufacture connectors (5 and 6) by assembling C-washer (10) and shell (11) on end of
blackout light wires.
4-45