TM 9-2330-384-14&P
4-22. CONVOY WARNING LIGHT WIRING MAINTENANCE.
C.
Removal of Condulet and Receptacle
Removal of Toggle Switch
a.
Installation of Condulet and Receptacle
Installation of Toggle Switch
d.
b.
Materials/Parts:
Equipment Conditions:
One gasket
Ref
Conditions
Two connectors
Intervehicular electrical cable discon-
Two locknuts
nected from semitrailer.
Corrosion preventive compound (Item 7,
Tools:
Tag marker
Tool kit, general mechanic's
Hand drill
General Safety Instructions:
Rivet gun
When performing electrical maintenance,
Wire terminal kit
l
ALWAYS disconnect intervehicular electri-
cal cable from semitrailer.
a. REMOVAL OF TOGGLE SWITCH
WARNING
When performing electrical maintenance, ALWAYS disconnect inter-
vehicular electrical cable from semitrailer. Failure to follow this warning
may create a spark and explosion, resulting in serious injury or death to
personnel.
NOTE
Tag wires for installation if lights are being removed from light box (1).
(1)
Remove four screws and pull stop/taillight (4) away from light box (1) enough to gain access
NOTE
Toggle switch (3) terminals should be marked to ensure proper installation
of terminals (2).
(2)
On outside of light box (1), remove rubber boot from toggle switch (3).
(3)
Remove nut and toggle switch (3).
(4)
Remove two screws and disconnect two terminals (2) from toggle switch (3) inside light box
(1).
4-56