4-28. TRIPLE CLEARANCE LIGHT ASSEMBLY REPLACEMENT (Con't).
If removed, install three new gaskets (4) and triple clearance light assembly (1) to semitrailer
with six screws (10). Leave two screws closest to conduit (6) loose.
Thread black wire (5) through straight adapter (8) into triple clearance light assembly (1).
Connect black wire to two brown wires (2) and crimp new connector (3).
Connect conduit (6) to triple clearance light assembly (1) at straight adapter (8) and tighten
nut (7). Tighten two loose screws (10) closest to conduit.
Apply a thin coat of corrosion preventive compound to sealing lip of lens (9). Install lens to
triple clearance light assembly (1).
Check operation of light (see TM 9-2320-273-10 or TM 9-2320-283-10).