TM 9-2330-384-14&P
4-29. ELECTRICAL CONDUIT AND WIRES REPLACEMENT (Con't).
(2)
If removing electrical conduit (1) at voltage control unit (2), at condulet (7) at side clearance
and marker light (6), at triple clearance light assembly, or at convoy warning light condulet,
loosen nut (9) and disconnect electrical conduit from connector (8).
CAUTION
Use caution when releasing electrical conduit (1) from under clips. Clips
should be lifted gently and only enough to release electrical conduit. Im-
proper handling of clips will cause them to break.
(3)
Gently lift clips to release electrical conduit (1). Remove electrical conduit.
(4)
Inspect all grommets along electrical conduit routing. If grommets are damaged, replace.
4-83