TM 9-2330-384-14&P
4-31. AXLE ALINEMENT (Con't).
NOTE
To lengthen adjustable radius rod (10), a clockwise rotation (when looking
to front) is required.
If front axle (3) needs alinement, loosen four nuts (9) at adjustable radius rod (10) on road-
(7)
side. Turn middle portion (11) as needed to lengthen or shorten.
Repeat steps 4 through 7 to check alinement of front axle (3). Continue to adjust length at
(8)
adjustable radius rod (10) until front axle is alined. Torque four nuts (9) to 110 lb.-ft.
(149 Nm).
4-93