4-54. SPARE TIRE CARRIER REPLACEMENT (Con't).
Dry cleaning solvent P-D-680 is toxic and flammable. Always wear protective
goggles, face shield, and gloves, and use only in a well-ventilated area.
Avoid contact with skin, eyes, and clothes and DO NOT breathe vapors. DO
NOT use near open flame or excessive heat. The solvent's flash point is
100F-138F (38C-59C). If you become dizzy while using cleaning sol-
vent, immediately get fresh air and medical help. If solvent contacts eyes,
immediately wash your eyes with water and get medical aid.
Use dry cleaning solvent to clean mounting surfaces of spare tire carrier (10) and braces to
frame. Allow to dry thoroughly.
To protect against corrosion and distortion of components, mylar tape must
be applied to mounting surfaces of spare tire carrier (10) and braces to
Apply suitable width of mylar tape to all mounting surfaces of spare tire carrier (10) and
braces to frame. Pierce holes in mylar tape at mounting bolt holes to prevent water accumu-
If removed, install two hook bolts (12) and wingnuts (11).