TM 9-2330-384-14&P
4-62. GROUND ROD TUBE ASSEMBLY REPLACEMENT (Con't).
(2)
At each end of ground rod tube assembly (1) remove nut (5) and washer (4) from top hook
bolt (3).
(3)
Pull down on two retaining straps (13) and remove ground rod tube assembly (1).
(4)
If a retaining strap (13) is damaged, remove nut (8) and washer (7) from bottom hook bolt
(3). Remove retaining strap. Remove two hook bolts from retaining strap.
b. INSTALLATION
NOTE
If installing door (9), perform step 3.
(1)
If removed, install hook bolts (3) to retaining strap (13). Install retaining strap to mounting
angle (2) with bottom hook bolt, washer (7), and nut (8).
NOTE
To gain enough length in retaining straps (13) to install ground rod tube
assembly (1), it may be necessary to loosen two nuts (8).
(2)
Install ground rod tube assembly (1) to two mounting angles (2) with two hook bolts (8),
washers (4) and nuts (5). If loosened, tighten two nuts (8).
(3)
Install door (9) to ground rod tube assembly (1) with screw (10), two washers (11), compres-
sion spring (6), and new locknut (12).
FOLLOW-ON TASKS:
Stow ground rod.
4-189