4-69. DATA PLATE REPLACEMENT (Con't).
DO NOT drill out rivets (4) if removing a data plate (3) from inside cabinet
(2). Cabinet is made of steel. Drilling a rivet from steel can produce a spark
which may cause an explosion and fire. Failure to follow this warning may
result in serious injury or death to personnel.
If removing a data plate (3) inside cabinet (2) use side cutters to remove four rivets (4). If
removing a data plate from aluminum framerail (1) at upper coupler assembly, use a hand
drill to drill out four rivets. Discard rivets.
(2) Replace data plate (3).
(1) Position data plate (3).
Rivets (4) used on data plates (3) inside cabinet (2) are installed with wash-
Use a rivet gun to install data plate (3) with four new rivets (4).