TM 9-2330-384-14&P
4-75. EMERGENCY VALVE REMOTE TRIP-RELEASE REPLACEMENT (Con?).
b. INSTALLATION
NOTE
If connecting cable (2) and tubing (1), perform steps 4 and 6.
Install straight adapter (10) to remote trip-release (4) with nut (5).
(1)
Install two screws (6) to remote trip-release (4).
(2)
Position remote trip-release (4) at mounting bracket (3) with cable (2) threaded through hole
(3)
in straight adapter (10) and U-bolt in remote trip-release.
Install nut (11) to straight adapter (10).
(4)
Install two washers (8) and new locknuts (9).
(5)
Take up slack in cable (2) and tighten two nuts (7).
(6)
Pull emergency valve control lever in cabinet to open (see paragraph 2-2), Pull on handle of
(7)
remote trip-release (4) and check that control lever in cabinet closes. If control lever in cabi-
net does not close, adjust length of cable (2) as required (see paragraph 4-74).
4-245