TM 9-2330-386-14&P
4-17 COMPOSITE LIGHT (CONT).
CAUTION
Do not pull on wires, only pull connectors apart. Pulling
o n wires could damage them.
(2) Pull four connectors (2) from wiring harness connectors (3).
(3) Support composite light (6) and remove two capscrews (4) and lock
washers (5).
(4) Guide connectors (2) through hole at rear of semitrailer and remove
composite light (6).
b. Disassembly.
(1) Loosen six captive screws (7) and remove lens (8) with O-ring (9).
Captive screws (7) are fitted with retaining rings (10) and will remain
in lens (8).
(2) Remove O-ring (9) from groove in lens (8).
(3) Remove lamps (11 and 12) from sockets in body (15).
(4) Gently pull circuit board (13) for access to socket, turn circuit board
plug counterclockwise, and pull from socket.
(5) Repeat step (4) to remove circuit board (14).
Repair.
is limited to the replacement of unserviceable parts. See
4-24