TM 9-2330-386-14&P
4-17 COMPOSITE LIGHT (CONT).
(1) position circuit board (14) plug in socket,press in, and turn clockwise.
(2) Repeat step (1) for circuit board (13)
(3) Install lamps (11 and 12) in sockets.
(4) Install O-ring (9) in groove of lens (8).
(5) Position lens (8) on body (15) .
(6) Tighten six captive screws (7).
e.Installation.
(1) Guide four connectors (2) through hole at rear of semitrailer and position
composite light (6).
(2)
connectors (3) according to
(3) Connect four connectors (2) to wiring harness
c i r c u i t m a r k e r bands.
(4) If removed, install new tie strap (1) at wiring harness.
(5) Connect electrical power and test for proper operation-
TASK ENDS HERE
4-25