TM 9-2330-386-14&P
4-36 SLACK ADJUSTER (CONT).
(6) Remove retaining ring (9) and washer (10).
(7) Rotate slack adjuster (11) arm out of the clevis (14).
(8) Remove slack adjuster (11) and spacer (12) from camshaft (17).
If necessary, use soft face hammer to tap slack adjuster (11) from
camshaft (17).
(9) Remove lubrication fitting (13) from slack adjuster (11).
NOTE
In following step, don't try to remove collar (15) from
clevis (14). The collar and clevis cannot be separated
after they are assembled.
(10) Remove clevis (14) with collar (15) from push rod (18). Do not remove jam
nut (19) from push rod (18).
4-70