TM 9-2330-386-14&P
4-44 FLOAT PADS (GROUND BOARD ASSEMBLIES.
This task covers removal and installation.
INITIAL SETUP
Tools
General mechanics tool kit
NOTE
This procedure is typical for both float pads. Snap hook
(2) is used on both sides of semitrailer. Snap hook (1)
is used on storage box side of semitrailer only.
a. R e m o v a l .
( 1 ) Unhook snap hook (1 and 2) clasps.
(2) Pull float pad (6) from brackets and
p l a c e on ground.
( 3 ) Remove snap hooks (1 and 2) from
chain (7).
( 4 ) Remove nut (3), washer (4), and
capscrew (5) holding chain (7) to
float pad handle.
(5) Lift float pad handle and pull chain
(7) from float pad (6).
(6) Remove chain (7).
(7) Remove S-hook (8).
4-83