Custom Search
|
|
|
||
 TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
SIDE REAR MARKER LIGHTS
4.
Connect negative (-) probe of
DO NOT ILLUMINATE -
digital multimeter to other
CONTINUED
terminal of circuit breaker
CB3.
5.
Note reading on digital
multimeter.
6.
If continuity is not present,
replace circuit breaker CB3
WARNING
Remove rings, bracelets, wristwatches, neck chains, and any other jewelry before
working around trailer. Jewelry may catch on equipment or may short across an
electrical circuit. Failure to comply may result in serious injury or death to personnel
2.
Check for 18-26 vdc at 24
1.
Close cover on voltage
vdc intervehicular cable
converter box (WP 0053
connector pin E.
2.
Disconnect intervehicular
cable from trailer (WP 0012
3.
Set digital multimeter to vdc.
0036 00-2
|
||
|
||
