Quantcast Table 1. Electrical System Troubleshooting Procedures - Continued - TM-9-2330-394-13-P0273

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
WARNING
Remove rings, bracelets, wristwatches, neck chains, and any other jewelry before
working around trailer. Jewelry may catch on equipment or may short across an
electrical circuit. Failure to comply may result in serious injury or death to personnel
1.
SIDE REAR MARKER LIGHTS
4.
Connect positive (+) probe
DO NOT ILLUMINATE -
of digital multimeter to 24
CONTINUED
vdc intervehicular cable
connector pin E.
5.
Connect negative (-) probe
of digital multimeter to a
known good ground.
6.
Position towing vehicle main
light switch to SER DRIVE
7.
Note reading on digital
multimeter.
8.
If 18-26 vdc is not present,
replace 24 vdc
intervehicular cable (WP
0036 00-3


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.