Quantcast Table 1. Electrical System Troubleshooting Procedures - Continued - TM-9-2330-394-13-P0284

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2.
ONE OR MORE REAR
5.
If continuity is not present,
MARKER LIGHTS DO NOT
repair wire (WP 0043 00) or
ILLUMINATE - CONTINUED
replace electrical cable
assembly (WP 0051 00). If
continuity is present, replace
center rear marker light
assembly (WP 0050 00).
10. Check for continuity between
terminal lug TL251 and
connector J254.
1.
Set digital multimeter to
ohms.
2.
Disconnect connector J254
from right rear marker light
connector.
3.
Connect positive (+) probe
of digital multimeter to
terminal lug TL251.
4.
Connect negative (-) probe
of digital multimeter to
connector J254.
5.
Note reading on digital
multimeter.
0036 00-14


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.