Custom Search
|
|
|
||
 TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
2.
ONE OR MORE REAR
6.
If continuity is not present,
MARKER LIGHTS DO NOT
repair wire between terminal
ILLUMINATE - CONTINUED
lug TL251 and connector
J254 (WP 0043 00) or
replace electrical cable
assembly (WP 0051 00). If
continuity is present repair
wire between terminal lug
TL264 and terminal lug
TL266 (WP 0043 00) or
replace electrical cable
assembly (WP 0051 00).
WARNING
Remove rings, bracelets, wristwatches, neck chains, and any other jewelry before
working around trailer. Jewelry may catch on equipment or may short across an
electrical circuit. Failure to comply may result in serious injury or death to personnel
3.
RIGHT FRONT MARKER
1.
Check for 18-26 vdc at 24
1.
Set digital multimeter to vdc.
LIGHT DOES NOT
vdc intervehicular cable
ILLUMINATE
connector pin E.
2.
Connect positive (+) probe
of digital multimeter to 24
vdc intervehicular cable
connector pin E.
0036 00-15
|
||
|
||
