Custom Search
|
|
|
||
 TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4.
LEFT FRONT MARKER
8.
If continuity is not present,
LIGHT DOES NOT
repair wire (WP 0043 00) or
ILLUMINATE - CONTINUED
replace electrical cable
assembly (WP 0051 00). If
continuity is present, replace
voltage converter box (WP
7.
Check for continuity from
1.
Remove four screws from
terminal lug TL263 to a
base.
known good ground.
2.
Extend base.
CAUTION
Two nuts are used to keep bottom nut in place. To prevent damage to equipment, use care when
removing base.
3.
Remove nut, lockwasher,
terminal lug TL263, base,
and gasket from trailer.
Discard lockwasher.
4.
Set digital multimeter to
ohms.
5.
Connect positive (+) probe
of digital multimeter to
terminal lug TL263.
0036 00-30
|
||
|
||
