Quantcast Table 1. Electrical System Troubleshooting Procedures - Continued - TM-9-2330-394-13-P0306

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
WARNING
Remove rings, bracelets, wristwatches, neck chains, and any other jewelry before
working around trailer. Jewelry may catch on equipment or may short across an
electrical circuit. Failure to comply may result in serious injury or death to personnel
6.
RIGHT TAILLIGHT DOES
1.
Check for 18-26 vdc at 24
1.
Disconnect 24 vdc
NOT ILLUMINATE
vdc intervehicular cable
intervehicular cable from
connector pin E.
2.
Set digital multimeter to vdc.
3.
Connect positive (+) probe
of digital multimeter to 24
vdc intervehicular cable
connector pin E.
4.
Connect negative (-) probe
of digital multimeter to a
known good ground.
5.
Position towing vehicle main
light switch to SER DRIVE
6.
Note reading on digital
multimeter.
0036 00-36


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.