Quantcast Table 1. Electrical System Troubleshooting Procedures - Continued - TM-9-2330-394-13-P0309

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6.
RIGHT TAILLIGHT DOES
4.
Check for continuity
1.
Disconnect connector J258
NOT ILLUMINATE -
between connector J258 and
from right taillight
CONTINUED
terminal lug TL254.
connector.
2.
Set digital multimeter to
ohms.
3.
Connect positive (+) probe
of digital multimeter to
connector J258.
4.
Connect negative (-) probe
of digital multimeter to
terminal lug TL254.
5.
Note reading on digital
multimeter.
6.
If continuity is not present,
repair wire between
connector J258 and terminal
lug TL254 (WP 0043 00) or
replace electrical cable
assembly (WP 0051 00).
0036 00-39


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.