Quantcast Table 1. Electrical System Troubleshooting Procedures - Continued - TM-9-2330-394-13-P0310

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6.
RIGHT TAILLIGHT DOES
5.
Check continuity through
1.
Loosen six screws and
NOT ILLUMINATE -
right taillight lamp.
remove cover and
CONTINUED
preformed packing from
housing. Discard preformed
packing.
2.
Remove lamp from socket.
3.
Set digital multimeter to
ohms.
4.
Connect positive (+) probe
of digital multimeter to
center of socket side of
lamp.
5.
Connect negative (-) probe
of digital multimeter to side
of socket side of lamp.
6.
Note reading on digital
multimeter.
7.
If continuity is not present,
replace lamp (WP 0049 00).
0036 00-40


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.