Quantcast Table 1. Electrical System Troubleshooting Procedures - Continued - TM-9-2330-394-13-P0314

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6.
RIGHT TAILLIGHT DOES
2.
Remove bolt, lockwasher,
NOT ILLUMINATE -
and terminal lug TL269 from
CONTINUED
trailer. Discard lockwasher.
3.
Set digital multimeter to
ohms.
4.
Connect positive (+) probe
of digital multimeter to
terminal lug TL269.
5.
Connect negative (-) probe
of digital multimeter to a
known good ground and
note reading on digital
multimeter.
6.
If continuity is not present,
repair wire (WP 0043 00) or
replace electrical cable
assembly (WP 0051 00).
7.
If continuity is present,
replace right taillight (WP
8.
Connect connector J258 to
right taillight connector.
9.
Install terminal lug TL 269,
lockwasher, and bolt on
back of base.
0036 00-44


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.