Quantcast Table 1. Electrical System Troubleshooting Procedures - Continued - TM-9-2330-394-13-P0318

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
7.
RIGHT STOPLIGHT DOES
4.
Position towing vehicle main
NOT ILLUMINATE -
light switch to OFF.
CONTINUED
5.
If continuity is not present,
replace module 2 (WP 0053
4.
Check for continuity through
1.
Loosen six screws on right
right stoplight lamp.
rear composite taillight
cover.
2.
Remove cover and
preformed packing from
housing. Discard preformed
packing.
3.
Remove lamp from socket.
4.
Set digital multimeter to
ohms.
5.
Connect positive (+) probe
of digital multimeter to
center of socket side of
lamp.
6.
Connect negative (-) probe
of digital multimeter to side
of socket side of lamp.
7.
Note reading on digital
multimeter.
0036 00-48


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.