Quantcast LEFT BLACKOUT STOPLIGHT DOES NOT ILLUMINATE -CONT. - TM-9-2330-394-13-P0356

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued
0036 00
ELECTRICAL SYSTEM - Continued
Table 1. Electrical System Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
13. LEFT BLACKOUT STOPLIGHT
2.
Connect positive (+) probe
DOES NOT ILLUMINATE -
of digital multimeter to
CONTINUED
terminal lug TL270.
3.
Connect negative (-) probe
of digital multimeter to a
known good ground and
note reading on digital
multimeter.
4.
If continuity is not present,
replace composite taillight
assembly (WP 0049 00).
5.
If continuity is present,
replace blackout lamp (WP
4.
Check to see if 18-26 vdc is
1.
Disconnect connector J265
present at connector J265.
from blackout stoplight
connector.
2.
Set digital multimeter to
ohms.
3.
Connect positive (+) probe
of digital multimeter to
connector J265.
4.
Connect negative (-) probe
of digital multimeter to a
known good ground.
0036 00-86


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.