Quantcast ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSTIC TOOL BLINKS FOUR TIMES IN SERIES: RIGHT ABS WHEEL SPEED SENSOR FAULT (LMTVT) -CONT. - TM-9-2330-394-13-P0409

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
BRAKE SYSTEM TROUBLESHOOTING - Continued
0037 00
BRAKE SYSTEM - Continued
Table 1. Brake System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
Loosen connector retaining
4.
Check to see if continuity is
10. ANTI-LOCK BRAKING
clip on connector YE1.
present across right ABS
SYSTEM (ABS) DIAGNOSTIC
control sensor harness
TOOL BLINKS FOUR TIMES
connector with jumper wire
IN SERIES: RIGHT ABS
across connector YE1.
WHEEL SPEED SENSOR
FAULT (LMTVT) -
CONTINUED
2.
Disconnect connector YE1
from ABS ECU.
3.
Install jumper wire across
connector YE1.
4.
Connect positive (+) probe
of digital multimeter to one
pin of ABS control sensor
harness connector.
5.
Connect negative (-) probe
of digital multimeter to other
pin of ABS control sensor
harness connector and note
reading on digital
multimeter.
6.
If continuity is not present,
replace ABS control sensor
7.
If continuity is present,
replace ABS ECU (WP 0065
0037 00-47


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.