Quantcast ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSTIC TOOL BLINKS 10 TIMES IN SERIES: ABS MODULATOR VALVE FAULT -CONT. - TM-9-2330-394-13-P0424

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
BRAKE SYSTEM TROUBLESHOOTING - Continued
0037 00
BRAKE SYSTEM - Continued
Table 1. Brake System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
5.
If continuity is not present,
14. ANTI-LOCK BRAKING
replace ABS control power
SYSTEM (ABS) DIAGNOSTIC
TOOL BLINKS 10 TIMES IN
SERIES: ABS MODULATOR
VALVE FAULT - CONTINUED
6.
Close voltage converter box
4.
Check to see if 18-26 vdc is
1.
Disconnect 24 vdc
present at 24 vdc
intervehicular cable from
intervehicular cable connector
pin K.
2.
Set digital multimeter to
ohms.
3.
Connect positive (+) of
digital multimeter to 24 vdc
intervehicular cable
connector pin K.
4.
Connect negative (-) of
digital multimeter to a
known good ground.
5.
Start towing vehicle engine.
6.
If towing vehicle is not FMTV
A1, position main light
switch to SER DRIVE and
depress brake pedal during
step (7).
0037 00-62


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.