Quantcast ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSTIC TOOL BLINKS 10 TIMES IN SERIES: ABS MODULATOR VALVE FAULT -CONT. - TM-9-2330-394-13-P0429

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
BRAKE SYSTEM TROUBLESHOOTING - Continued
0037 00
BRAKE SYSTEM - Continued
Table 1. Brake System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
8.
Check to see if continuity is
1.
Open voltage converter box
14. ANTI-LOCK BRAKING
present between ABS POWER
SYSTEM (ABS) DIAGNOSTIC
connector pin 1 and ground
TOOL BLINKS 10 TIMES IN
post terminal lug.
SERIES: ABS MODULATOR
VALVE FAULT - CONTINUED
2.
Set digital multimeter to
ohms.
3.
Connect positive (+) probe
of digital multimeter to ABS
POWER connector pin 1.
4.
Connect negative (-) probe
of digital multimeter to
ground post terminal lug.
5.
If continuity is not present,
replace ABS control power
6.
If continuity is present,
replace voltage converter
0037 00-67


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.