Quantcast ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSTIC TOOL BLINKS 14 TIMES IN SERIES: ABS SYSTEM CONFIGURATION OR POWER SUPPLY FAULT -CONT. - TM-9-2330-394-13-P0432

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
BRAKE SYSTEM TROUBLESHOOTING - Continued
0037 00
BRAKE SYSTEM - Continued
Table 1. Brake System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3.
Connect negative (-) probe
15. ANTI-LOCK BRAKING
of digital multimeter to a
SYSTEM (ABS) DIAGNOSTIC
known good ground and
TOOL BLINKS 14 TIMES IN
note reading on digital
SERIES: ABS SYSTEM
multimeter.
CONFIGURATION OR POWER
SUPPLY FAULT - CONTINUED
4.
If continuity is not present,
go to step 8 of this
malfunction.
5.
If continuity is present,
replace ABS ECU (WP 0065
3.
Check to see if continuity is
1.
Open voltage converter box
present between ABS POWER
connector and circuit breaker
CB1.
2.
Set digital multimeter to
ohms.
3.
Connect positive (+) probe
of digital multimeter to
POWER connector pin 1.
0037 00-70


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.