Quantcast ANTI-LOCK BRAKING SYSTEM (ABS) DIAGNOSTIC TOOL BLINKS 14 TIMES IN SERIES: ABS SYSTEM CONFIGURATION OR POWER SUPPLY FAULT -CONT. - TM-9-2330-394-13-P0437

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
BRAKE SYSTEM TROUBLESHOOTING - Continued
0037 00
BRAKE SYSTEM - Continued
Table 1. Brake System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
7.
Check to see if continuity is
1.
Set digital multimeter to
15. ANTI-LOCK BRAKING
present across circuit breaker
ohms.
SYSTEM (ABS) DIAGNOSTIC
CB1.
TOOL BLINKS 14 TIMES IN
SERIES: ABS SYSTEM
CONFIGURATION OR POWER
SUPPLY FAULT - CONTINUED
2.
Connect positive (+) probe
of digital multimeter to one
terminal of circuit breaker
CB1.
3.
Connect negative (-) probe
of digital multimeter to other
terminal of circuit breaker
CB1 and not reading on
digital multimeter.
4.
If continuity is not present,
replace circuit breaker CB1
5.
If continuity is present,
replace voltage converter
0037 00-75


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.