Quantcast LUBRICATION SERVICE INTERVALS - UNUSUAL CONDITIONS

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
PREVENTIVE MAINTENANCE CHECKS AND SERVICES,
0042 00
INCLUDING LUBRICATION INSTRUCTIONS - Continued
LUBRICATION SERVICE INTERVALS - NORMAL CONDITIONS - Continued
Table 3. Cleaning Agents
Specification
Type
O-C-1901
Cleaning Compound, Window
P-D-680
Dry Cleaning Solvent, SD ll
Table 4. Cleaning Agent/Temperature
EXPECTED TEMPERATURES*
DESCRIPTION
CAPACITY
Above +15F
+15F to -15F
-15F to -50F
(Above -9C)
(-9C to -26C)
(-26C to -46C)
All metal parts as
N/A
P-D-680 (all temperatures)
required.
Windshield
N/A
2/3 water to 1/3 O-   water to O-C-  1/3 water to 2/3 O-
cleaning solution
C-1901
1901
C-1901
*For arctic operation refer to FM 9-207, Operation and Maintenance of Ordnance Materiel in Cold Weather
(0 degrees to minus 65F).
LUBRICATION SERVICE INTERVALS - UNUSUAL CONDITIONS
The trailer will require extra service and care when you operate under unusual conditions. High or low
temperatures, long periods of hard use, or continued use in sand, water, mud, or snow will break down the
lubricant requiring you to add or change lubricant more often.
CLEANING AND LUBRICATION
WARNING
Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and gloves;
use only in well-ventilated area; avoid contact with skin, eyes, and clothes, and do not breath
vapors. Keep away from heat or flame. Never smoke when using Dry Cleaning Solvent; the
flashpoint for Type I Dry Cleaning Solvent is 100 F (38 C) and for Type II is 138 F (50 C).
Failure to comply may result in serious injury or death to personnel.
If personnel become dizzy while using Dry Cleaning Solvent, immediately get fresh air and
medical help. If Dry Cleaning Solvent contacts skin or clothes, flush with cold water. If Dry
Cleaning Solvent contacts eyes, immediately flush eyes with water and get medical attention.
Failure to comply may result in serious injury or death to personnel.
Dirt, grease, oil, and debris only get in the way and may cover up a serious problem. Use Dry Cleaning
Solvent on metal surfaces where directed.
0042 00-7


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.