Quantcast SPRING BRAKE CAGING PROCEDURES

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
SPRING BRAKE CAGING PROCEDURES
THIS WORK PACKAGE COVERS:
Caging Spring Brakes, Uncaging Spring Brakes
INITIAL SETUP:
Maintenance Level
Tools and Special Tools (Continued)
Operator
Wrench Set, Socket (Item 46,
Tools and Special Tools
Tool Kit, Genl Mech (Item 37, WP 0178 00)
Personnel Required
Goggles, Industrial (Item 8, WP 0178 00)
Two
Wrench, Torque, 0-175 lb-ft (Item 49,
Equipment Conditions
Socket, Socket Wrench (Item 34,
Wheels chocked (WP 0011 00).
Air tank drained (WP 0011 00).
CAGING SPRING BRAKES
WARNING
Wear appropriate eye protection when working under trailer due to the
possibility of falling debris. Failure to comply may result in injury to
personnel.
Trailer wheels must be chocked before caging parking/emergency spring
brakes. Failure to comply may result in injury to personnel.
CAUTION
Do not attempt to tow the trailer with spring brakes caged except to move the trailer out
of the traveled portion of the highway. Failure to comply may result in damage to
equipment.
NOTE
To cage spring brakes, caging procedures apply to both front and rear brake air
chambers.
All spring brakes are caged the same way. Left side of LMTVT shown.
0047 00-1


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.