Quantcast CLEARANCE AND MARKER LIGHT INSTALLATION (LED Clearance Model)

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
 
TM 9-2330-394-13&P
CLEARANCE AND MARKER LIGHT ASSEMBLIES
0050 00
REPLACEMENT - Continued
CLEARANCE AND MARKER LIGHT REMOVAL (LED Clearance Model) - Continued
4.
Remove three self-locking nuts (11), washers (12), screws (13), and marker light (3), from bumper
(14).
5.
Remove gasket (15) from marker light (3).
CLEARANCE AND MARKER LIGHT INSTALLATION (LED Clearance Model)
NOTE
Install plastic cable ties as required.
All clearance and marker lights are installed the same way. Right front clearnace light
shown.
Clearance and marker connectors are:
Right front clearance connector ................
J250:TL262
J251:TL263
Left front clearance connector...................
J255:TL267
Right rear clearance connector .................
J256:TL268
Left rear clearance connector....................
Left marker light ......................................
J252:TL264
Center marker light ..................................
J253:TL265
Right marker light ....................................
J254:TL266
0050 00-9


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.